 |
MD_Cubo LED Cube Arduino Library
2.1
Library to control LED Cubes
|
|
MD_Cubo LED Cube Arduino Library
2.1
Library to control LED Cubes
|
This is the complete list of members for MD_Cubo_STC, including all inherited members.
| _intensity | MD_Cubo | protected |
| _sizeXaxis | MD_Cubo | protected |
| _sizeYaxis | MD_Cubo | protected |
| _sizeZaxis | MD_Cubo | protected |
| animate(uint32_t wait=0) | MD_Cubo | virtual |
| axis_t enum name | MD_Cubo | |
| begin() | MD_Cubo_STC | virtual |
| clear(uint32_t p=VOX_OFF) | MD_Cubo_STC | virtual |
| copyPlane(plane_t plane, uint8_t cordFrom, uint8_t cordTo) | MD_Cubo | |
| drawCube(uint32_t p, uint8_t x, uint8_t y, uint8_t z, int8_t size) | MD_Cubo | |
| drawLine(uint32_t p, uint8_t x1, uint8_t y1, uint8_t z1, uint8_t x2, uint8_t y2, uint8_t z2) | MD_Cubo | |
| drawRPrism(uint32_t p, uint8_t x, uint8_t y, uint8_t z, int8_t dx, int8_t dy, int8_t dz) | MD_Cubo | |
| fillPlane(uint32_t p, plane_t plane, uint8_t coord) | MD_Cubo | |
| getIntensity(void) | MD_Cubo | |
| getVoxel(uint8_t x, uint8_t y, uint8_t z) | MD_Cubo_STC | virtual |
| isColorCube() | MD_Cubo_STC | virtual |
| MD_Cubo(uint8_t sizeCube) | MD_Cubo | |
| MD_Cubo_STC(uint8_t tx, uint8_t rx, uint32_t bps) (defined in MD_Cubo_STC) | MD_Cubo_STC | |
| plane_t enum name | MD_Cubo | |
| setIntensity(uint8_t intensity) | MD_Cubo | virtual |
| setVoxel(uint32_t p, uint8_t x, uint8_t y, uint8_t z) | MD_Cubo_STC | virtual |
| setVoxel(boolean p, uint8_t x, uint8_t y, uint8_t z) | MD_Cubo_STC | virtual |
| size(axis_t axis) (defined in MD_Cubo_STC) | MD_Cubo_STC | |
| update() | MD_Cubo_STC | virtual |
| XAXIS enum value | MD_Cubo | |
| XYPLANE enum value | MD_Cubo | |
| XZPLANE enum value | MD_Cubo | |
| YAXIS enum value | MD_Cubo | |
| YZPLANE enum value | MD_Cubo | |
| ZAXIS enum value | MD_Cubo | |
| ~MD_Cubo() | MD_Cubo | |
| ~MD_Cubo_STC() (defined in MD_Cubo_STC) | MD_Cubo_STC |
1.8.20